How To Connect Solar Inverter To Wifi- A Detailed Overview

Experts guide us through how to connect solar inverters to wifi. So the first thing you want to do is open up your wifi settings on your phone.

Continue from this user capable of seeing your formal house formats and all the other formats available.

User with a look at the wifi name “AP_,” followed by a series of numbers. This is your wifi device linked to your inverter.

If the person can tap on that one, it asks for a password. The password is on the bottom of the wifi dongle.

How To Connect Solar Inverter To Wifi?

System navigation setting and linked directly to the solar network.

When the Solar inverter starts working, we should work the solar inverter with a wireless connection.

Then, how to connect the solar inverter to wifi is not a problem—link your solar panel directly with your wireless connection.

Users can select the passcode, and Login ID, create their login ID and security code and link with your wifi directly.

Solar systems do not have the proper configuration. It works primarily on wireless running at power consumption.

Installation of the Login device operates with a wireless connection at your home. If discussions about the area are covered, it covers the area of thousand feet to access one pole.

Technique To Connect Solar Inverter To Wifi:

Password Information:

From there, enter the password there-remember that sometimes, even if you enter it correctly, it won’t allow it.

You must enter it several times, but this isn’t very often. From there, go into any internet browser you may use and type in the website address bar: 10.10.100.254.

This will redirect you to log in for this site, which is your inverter’s information.

Log-In Procedure:

From there, click login, and you’ll be taken to a screen where you can see all kinds of inverter information.

It will ask for a Login ID and Passcode. Both login ID and password are “-admin-” all lowercase – so that is all lowercase for the login ID and all lowercase for the passcode.

Status Wizard:

Now, on the left, there are Status Wizard Quick sets and a few other menu options. If we can move from status and tap ‘wizard,’ the wizard will take us to a site.

Keep in mind, that this does take a minute, but it will load up all the wifi networks that the inverter can see.

From here, I’d like to select the wifi network you want to link to, so home wifi network, and click ‘next.’

From there, all you have to do is enter your passcode-so you wifi passcode-you can click “show passcode” to ensure sure that you entered the correct passcode according to the procedure.

Linked To Inverter:

Once you lower the keypad, tap “Next” again; now, on this third screen, there isn’t too much we have to worry about, so tap next.

And again, on the last screen, there isn’t anything you have to worry about, so tap “okay.”

From there, I’d like you to confirm that the inverter has been connected. We’ve completed all the steps to connect your inverter to the wifi.

Single-Phase Inverter:

Once you lower the keypad, tap “Next” again; now, on this third screen, there isn’t too much we have to worry about, so tap next.

And again, on the last screen, there isn’t anything you have to worry about, so tap “okay.”

From there, I’d like you to confirm that the inverter has been connected. We’ve completed all the steps to connect your inverter to the wifi.

Single-Phase Inverter:

Now, on a single-phase inverter, the method is simple. All I want the user to do is look at the wifi dongle on the inverter.

If you successfully linked your inverter to the wifi, the light on the left, with “NET” written underneath it, will now be on or flashing.

Before connecting the wifi, there would have only been the two lights on the right or flashing, with the light on the left solid off.

Three-Phase Inverter:

If it’s one or more, it is linked to the wifi, so I completed the task.

If it hasn’t connected to the wifi or that light is not on, please go through it again, being extra careful that the password is entered incorrectly.

Then, enter all the steps we did before. Now, these lights are impossible to see on a Three Phase inverter. D before? So, open up an internet browser.

Type in at the web address: 10.10.100.254. Now, your login ID and security code should be there already.

If not, again, the login ID is “-admin-,” all lowercase and the security code is “-admin-” all lowercase. You’ll automatically go back to the status display at the top.

Now, in the middle portion of this display, the user will see three drop-down menus, with the top menu already open.

If you scroll down to the second top drop-down menu, it reads “device information.”

Code Scanner Over The Wifi Dongle Scanner:

Now, Experts guide us on how you connect your inverter to your Solar man app account!

So, I’d ask you to tap on the plus button, the blue plus button up the top right-hand corner of the screen. This will bring down a code scanner.

Now, on a single-phase widget, you can look into your wifi device to chuck this code scanner over the QR code of the wifi dongle.

On a Three-phase inverter, unfortunately, you can’t see it, so you do have to encode physically – so if you scroll down, you can see the device serial number.

Currency Screen:

You need to type that device serial number into the screen. From there, click “Okay” Now, it will be you to the screen, where it asks for a few different details, mainly the plant address.

So the address that inverted inducted installed the inverter. We’re just typing in our discourse for that.

Once this is typed in, you will scroll down, and you’ll notice the capacity is 5kW – this is an automatic setting.

Users will also see that the currency has no background. You can tap on that currency screen – you’ll bring up all different types of coins.

These are all areas where solar sends its inverters around the world.

Plant Naming:

Towards the bottom of the screen, you will notice AUD – tap AUD and say that you are generating in Australian Dollars, please.

From there, tap “next.” After you tap “next,” it will ask for the plant name. Type that in and click the “done” form if you can. So the plant name is generally your name.

Once you’ve entered your plant name into the information area and clicked “done,” it will bring the screen where the user can see all your generations, usually.

Conclusion:

Video Help:

Maybe this video will help you.